Manufacturer Specs

Distributor
Configuration 1×12:
1 x DB-25 F (8 outputs – Tascam/Avid analog pin configuration), 2 x XLR M, 2 x 1/4″ TRS
Input Signal SMPTE/EBU Longitudinal Time Code
Impedance: 20KΩ bal.; 10KΩ unbal.
Level: -30dbU min; +20dbU Max
Output Signal: Waveform: switchable rise time: 1us (square); 25us (SMPTE); 50us (EBU)
Impedance: 600Ω bal.; 300Ω unbal.
Level: adjustable: full off to +8dbU bal.; to + 2dbU unbal.
Amplitude distortion: less than 2%
Status LEDs: Reshape
Repair (TCG option) Generate (TCG option)
TC In Video In
Ethernet
Warning LEDs: Input Error (red)
Video Phase (yellow) Video Drift (red)
Video Termination Off (yellow)
Time Code Reader: The 8 digit LED Display indicates hours, minutes, seconds and frames.
The display also flashes error descriptions when detected.
LCD Display: In addition to being used for SET UP, the 32 carachter LCD display indicates the following:
– Format and rate of the incoming time code
– Format and rate of the video reference
– User Bits
– Video Phase
– List of errors
Connectors: Time Code in: XLR Female (x 1)
Video Ref: BNC (x 1)
Time Code outputs:
– DB25 (1x) – Tascam/Avid analog pin configuration: outputs 1-8;
– XLR Male (2x): outputs 9-10;
– 1/4″ jacks (2x) – TRS: outputs 11-12
Ethernet: RJ45 jack (x 1)
Power: 4 pin circular (x 2)
Power: 12VDC @ 5A
Redundancy: two separate supplies can be connected to the 2 separate power inputs. If one supply fails, the other takes over and an error is reported. The faulty supply can be swapped without having to power down.
Dimensions: 19” x 8.125” x 1.75” (48.26 cm x 20.64 cm x 4.45cm)